Installation Guide

the mirror hangs securely.

NOTE:

It is best to nd a stud in your wall to ensure

Installation

Preparing the wall

□ Place the mirror (A) against the wall and determine your

desired hanging location. Using a pencil, mark two

locations on the wall that match up with the mirror’s (A)

pre-attached mounting hooks.

Ensure the marks are horizontally straight by using

a level.

Use a hammer to gently punch the anchor (AA) halfway

into the wall at each marked location. Finish screwing

in the anchor (AA) with the screwdriver.

Using the screwdriver, insert the screws (BB) into the

anchors (AA), leaving approximately 1/8 in. of the screw

revealed.

□

Hanging the mirror

□

Hold the mirror (A) in place against the wall and line up the

mounting hooks with the screws (BB).

Loop the mounting hooks over the scews (BB) to hang the

mirror.

□