Assembly Guide

For more information on the remote and
app connectivity please go to
www.FullCircleGear.com
Smart Assistant integration requires a free
Magic Home Pro account to connect to
online features like Smart Assistants and
remote device access.
Step 2: Open wi-fi settings on the
phone and connect to
"LEDnetxxxxx" wi-fi.
After successful connection, go
back to the Magic Home Pro App.
The Saturn Light® will be listed
under “Devices”
1. Remove from pole. 2. Rotate inner or outer ring. 2. Flip light completely around
Note: The ring only spins one direction Note: Threads should be on the bottom
Step 3: Make sure Step 1 and 2 are done. Then open the App and click the "+" button in the
upper right corner, then select "Connect device to wi-fi network".
Step 4: Choose the wi-fi network you want the light to be on and enter the password if needed. The
Light may change color as it connects to the network. You can also change the name of the Light now.
Step 5: The Light is now connected! Connect your phone to the same network as the light to see
it in the App. Create a free Magic Home account for remote access and smart features.
Saturn Light®: How to use the Saturn Light
10sec
off
on
on
RGB Color Presets
Speed Faster
Cool White
Speed Slower
On
Off
Next Effect
Previous Effect
Brightness Up
Brightness Down
Step 1: Download SmartPhone
App
“Magic Home Pro”
Connect to the App
Change From Up to Down Light - Flip the Ring Around the Light
Remote Guide
Connect Saturn Light to a wi-fi Network.
Pair a new Remote
Warm White
RGB Color
Cool Warm Mix
for more information, please go to FullCircleGear.com
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Reorient or relocate the receiving antenna.
‐ Reorient or relocate the receiving antenna.
‐Consult the dealer or an experienced radio/TV technician for help important announcement Important
Note: Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator
and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.