Installation Manual

ManualsBrandsFORGING MOUNT ManualsElectronicsTV Wall Mount TV Bracket,FORGING MOUNT Full Motion Dual Articulating Arms for Most 37-70 inch LED,LCD,OLED,Plasma Screen TVs,up to 132LBS,VESA 600X400mm-16.5" Extension Roating

5/16 in x 2¾ in.

Arm andWall Plate

TV Bracket

Hex Key

Lag Bolts

Lag Bolt

Washers

TV Extension

Screws

TV Bracket Extensions

M6 x

TV Screws

TV Washers

Spacers

M4 x 12mm

M6 x 12mm

M6 x 35mm

22mm

M4 x 35mm

M8 x 16mm

M8 x 25mm

M8 x 35mm

M8 x 50mm

2.5mm

FULL-MOTION

TV WALL MOUNT

For 37– 70” (93.9 –177.8 cm) TVs

Model FM9380-B

STEP 1-1

Select TV

Screw Diameterr

STEP 1-2

Select TV

Screw Length

FLAT BACK ROUND BACK CABLESINSET HOLES

Too Short

Too Long

Correct

132 lbs.

(60 kg)

Does your TV

(including accessories)

weight more than 132 lbs. (60 kg) ?

—

Perfect!

Yes

—

This mount is NOT compatible.

Getting Started

Tools Needed

Hardware Included

STEP 1-3 Measure Your TV Hole Pattern

If your TV has a flat back, AND you want your TV closer

to the wall, use the shorter screws (A).

Use the spacers and longer s crews

(

o accommodate:

• Round/irregular back TVs

• TVs with inset mounting holes

• Extra space needed for cables

CAUTION: Verify

adequate thread

engagement with the screw

washer/spacer combination

AND TV bracket .

- Too short will not hold the TV.

- Too long will damage the TV.

Standard configurations

are shown. For special

applications, or if you

are uncertain about your

hardware selection,

you can see online:

www.forgingmount.com

Hand thread screws into the threaded inserts

on the back of your TV to determine which

screw diameter (

M4, M6, or M8) to use.

WARNING:

Exceeding the weight

capacity can result in serious personal

injury or damage to equipment! It is the

installer's responsibility to make sure the

weight of the TV (with accessories) does

not exceed 132 lbs (60 kg).

Drywall with

wood studs?

Perfect!

What is your wall made of?

Please read

through these instructions completely to be sure you’re comfortable with

this easy install process. Also check your TV owner’s manual to see if there are any

special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the

installation, assembly or use of this product, please online vi

deo at www.forgingmount.com

CAUTION: Avoid potential personal injuries and property damage!

●

This product is designed for use in wood stud/concrete walls

DO NOT

install into

rywall

alone

●

The wall must be capable of supporting ﬁ

ve times the weight of the TV and mount combine

●

Do not use this product for any purpose not explicitly speciﬁ

ed by manufacturer

●

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

WARNING:

This product

contains small items that could

bea choking hazard if swallowed.

Before starting assembly,

verify all parts are included

and undamaged. If any parts

are missing or damaged, do

not return the damaged item to

your dealer; contact Customer

Service.

Never use damaged parts!

NOTE: Not all parts and

hardware included will be used.

Solid concrete or

concrete

block?

Concrete Install

Hammer

Drill Bit

3/8 in.

(10 mm)

Concrete

Wood Stud Install

AwlStud Finder

7/32 in.

(5.5 mm)

Wood

Drill Bit

Pencil Screwdriver

Tape

Measure

Electric

Drill

1/2 in.

(13 mm)

Socket

Wrench

inch dimensions are approximate

100 mm = 10 cm ≈ 4 in.

200 mm = 20 cm ≈ 7 7/8 in.

300 mm = 30 cm ≈ 11 3/4 in.

400 mm = 40 cm ≈ 15 3/4 in.

600 mm = 60 cm ≈ 23 5/8 in.

x Height

Width

mm mm

STEP 1-4 Assemble Your TV Bracket

These smaller hole patterns only use TV

bracket

Do not use the four TV bracket

extenders

and eight screws

[concrete anchor]

1/4-20 x 1/2 in.

Locking Screw

400 x 400 mm

300 x 300 mm

15.75

[400]

[300]

11.81

[400]

15.75

[300]

11.81

[600]

23.62

[400]

15.75

600 x 400 mm

400 x 200 mm

[400]

15.75

[200]

7.87

[400]

15.75

[300]

11.81

[300]

11.81

[400]

15.75

400 x 300 mm

200 x 400 mm

[400]

15.75

[200]

7.87

75 x 75 mm

200 x 200 mm

Based on your TV hole pattern measurements

from STEP 1-3 todetermine your

TV bracket configuration: A, B, C, D, E or F.

level

VELCRO TIE

HDMI Cable

3 2

100 x 100 mm

300 x 200 mm

[300]

11.8

200 x 300 mm

[300]

11.8

Summary of content (2 pages)

PAGE 1
Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8 ) to use. If your TV has a flat back, AND you want your TV closer to the wall, use the shorter screws (A). M4 M6 M8 Select TV Screw Length Use the spacers and longer s crews(B) to accommodate: • Round/irregular back TVs • TVs with inset mounting holes • Extra space needed for cables A 04 x1 Standard configurations are shown.
PAGE 2
-1 STEP 2 Wall Plate Install ( Wood Stud) 2-2 CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) SSTEP 3 Locate your studs. Verify and mark the center of the studs by finding the stud edges using an awl, a thin nail, or an edge-to-edge stud fi nder.