Installation Manual
• Carefully open the carton, remove contents and layout on cardbard or other protective
surface to avoid damage.
• Check to assure that all components were received undamaged. Do not use damaged or
defective parts.lf you require replacement parts, contact customer service at
forgingmount888@163.com
• Carefully read all instructions before attempting installation.
UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
•Install and operate this product with care. Please read this instruction before beginning the
installation, and carefully follow all instructions contained herein. Use proper tools during
installation.
•
If you do not understand the instructions or have any concerns or questions, please contact
customer service at
forgingmount888@163.com
WARNING:
Exceeding the weight capacity can result in serious personal injury or damage to equipment!
over resulting in death or serious injury!
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from yong children
:
It is the installer’s responsibility to make sure the combined weight of HY4104 and the display
does not exceed 99 Lbs(45kg).Use with heavier televisions may result in instability causing tip
Supplied Parts List
Wire Clip
1
TV Plate
(x1)
1
Support Pillar Tempered Glass Monitor Bracket
Plastic Socket
(x1)
2
(x1)
3 4
(x2) (x1)
5
M8x35 Bolt M6x50 Bolt
(x3)
A
(x4)
B
M8X22X2
(x3)
C
M8X22X2
(x3)
D
Metal Pad
Safety Lock
Rubber Pad
(x2)
E
(x6)
F
(x2)
G
(x1)
H
(x1)
I
(x2)
J
Allen Key(5mm) Allen Key(4mm)
Spacer 2.5mm Spacer 5mm Spacer 20mm
Washer with 3 holes
Steel Washer
Plastic Washer