SDS

Section 2. Hazards identification
Prevention
:
Wear protective gloves. Wear eye or face protection. Keep away from heat, hot
surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-
proof electrical, ventilating, lighting and all material-handling equipment. Use only non-
sparking tools. Take precautionary measures against static discharge. Keep container
tightly closed. Use only outdoors or in a well-ventilated area. Do not breathe vapor.
Contaminated work clothing should not be allowed out of the workplace.
Response
:
Get medical attention if you feel unwell. IF INHALED: Remove victim to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or
physician if you feel unwell. IF SWALLOWED: Immediately call a POISON CENTER or
physician. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Wash with
plenty of soap and water. If skin irritation or rash occurs: Get medical attention.
Storage
:
Store locked up. Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Hazards not otherwise
classified
:
None known.
Please refer to the SDS for additional information. Do not transfer contents to other
containers for storage.
Supplemental label
elements
DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue
may spontaneously catch fire if improperly discarded. Immediately place rags, steel
wool, other waste soaked with this product, and sanding residue in a sealed, water-filled,
metal container. Dispose of in accordance with local fire regulations. DELAYED
EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause
permanent brain and nervous system damage. Intentional misuse by deliberately
concentrating and inhaling the contents can be harmful or fatal. WARNING: This
product contains a chemical known to the State of California to cause birth defects or
other reproductive harm. FOR INDUSTRIAL USE ONLY.
Section 3. Composition/information on ingredients
Med. Aliphatic Hydrocarbon Solvent
69.8
64742-88-7
Methyl Ethyl Ketoxime
0.1
96-29-7
Ingredient name
CAS number
% by weight
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Other means of
identification
:
Not available.
Substance/mixture
CAS number/other identifiers
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention following exposure or if feeling unwell.
Section 4. First aid measures
Eye contact
:
Description of necessary first aid measures
Date of issue/Date of revision
:
4/6/2015.
Date of previous issue
:
No previous validation.
Version
:
1
2/11