450DT Spec Sheet

Key Features
• Safety Interlock
• Vacuum & Release
• Vacuum Gauge
• PLC Control with 4” Mono
Touch Screen
• 20 Programme Memory
• Independently Controllable
Heating Zones
Options
• Reducing Windows
• Dedicated Trolley
• Reel Feed
• Starter Pack of Plastic
• Spare Parts Kit
Formech 450DT customers include:
• Seoul Foreign School (Education - Seoul)
• Ingeniería para Moldes y Maquinaría Ligera S.A.L.
(Engineering - Spain)
• Istituto Istruzione Superiore Giulio Natta (Education - Italy)
• Flemming Dental Tec GmbH deal (Medical - Germany)
• Nestlé Espana (Food Industry - Spain)
• Denny Craft Mould (Chocolate & Confectionery - UK)
• The Kingston Academy (Education - UK)
• Maison Thiriet (Food Industry - France)
• CHB (Electronics - France)
• Thalès (Transportation & Defence - France)
• TDX - Thermodynamix Thermoforming Specialist
Services Ltd deal (Thermoforming - UK)
• Vikiallo ApS (Industrial equipment - Germany)
450DT Desktop Vacuum Forming Machine
Our desktop models are the perfect fi rst approach to
vacuum forming. Easy to use, intuitive but yet very
professional, they are the go-to models for creatives,
hobbyists, students and chocolatiers.
Quiet and built-in vacuum system, energy effi cient
quartz heaters, safety interlock and Mono HMI
operating interface for the bigger desktop models will
help you achieve consistent formings.
*certain materials over 4mm thick may require turning the sheet mid-cycle
Formech machine features and specifi cations are subject to change without notice as part of our continual product development programme. 450DTSS_V1.2
For more information and product videos formech.com
Forming Area
(mm / inches)
Sheet Size
(mm / inches)
Max Depth
of Draw
Max Material
Thickness
Heater Type Heating
Zones
Width Height Depth Weight
430 x 280mm /
17 x 11"
450 x 300mm /
18 x 12”
160mm / 6.3” *6mm /
0.25”
Quartz 4 639mm /
25.2”
525mm /
20.7"
986mm /
38.8"
75kg /
165lbs
Single Phase Power
Requirements
Other Voltage
(USA)
Power Consumption Vacuum
Pump Type
Pump Flow (SCFM @ 0 in. / 60Hz)
(Pump fl ow m3 /h @ 0mbar / 50Hz)”
Mould release
method
Air
Requirements
208-240V / 13A 110-120V / 15A 2.4kW (1.6kW USA) Diaphragm 3.0 (4.9) Pump exhaust n/a
Technical Specifi cations