How to Guide

ManualsBrandsFormica Brand Laminate ManualsLaminate Sheets303-58-48X96-000

LAMINATE SURFACES

FROM FORMICA CORPORATION

How

Install

Countertop

For more information:

In the United States, call 1-800-FORMICA

™

In Canada, call (800) 363-1405.

In Mexico, call (525)530-3135.

Formica and the Formica logo are

registered trademarks of The Diller Corporation.

1-800-FORMICA

™

is a trademark of

The Diller Corporation.

Cincinnati, OH 45241

Printed in U.S.A.

Form No. 02-045 (07/05)

Summary of content (5 pages)

PAGE 1
LAMINATE SURFACES FROM FORMICA CORPORATION How to Install a Countertop For more information: In the United States, call 1-800-FORMICA™. In Canada, call (800) 363-1405. In Mexico, call (525)530-3135. Formica and the Formica logo are registered trademarks of The Diller Corporation. 1-800-FORMICA™ is a trademark of The Diller Corporation. © 2005 Formica Corporation Cincinnati, OH 45241 Printed in U.S.A. Form No.
PAGE 2
Tools Required Introduction Jig Saw Scriber-Compass Drill and Drill Bit Adjustable Wrench Block Plane Screwdriver Belt Sander Sandpaper Smooth File Caulk Gun Hand Laminate Trimmer with carbide cutter Heat-Conductive Aluminum Tape Installing your own countertop is an opportunity for self-expression – and money savings. To help you do the job efficiently and with style, we've listed all the essential materials you will need, as well as nine simple steps for installing your new countertop.
PAGE 3
Step 1 Fitting to Length Check for proper length. Allow desired overhang. End caps should be used on all exposed ends (end cap kits). End splashes should be used where top butts wall (end splash kit). Additional material should be allowed to scribe for a tight fit to end wall. Step 2 Step Place your countertop upside down on a flat surface. Choose strips of wood thick enough to allow the countertop surface to match the front build-up. Glue strips around perimeter of countertop.
PAGE 4
Step 5 Making Cutouts for Sinks or Rangetops Always follow manufacturer's directions for installing appliances. Place the sink or rangetop rim on the back side of the countertop, where the appliance is to be located. Mark all the way around the edge of the rim. Use a jig saw to cut the hole 1/4" to 3/8" smaller than the line. All cutout corners should have clean, chip-free radii. Apply two layers of heat-conductive aluminum tape around rangetop cutout.
PAGE 5
Step 9 Finishing Installation and Care Remove excess sealant from sink area or end splash. The Formica® brand laminate surface of your new countertop is highly resistant to staining, wear and heat. It is not, however, completely impervious to chemicals, scratches and hot objects. Cleaning. Formica brand laminate-clad countertops may be cleaned with a clean, non-abrasive, damp cotton cloth and a mild liquid detergent or household cleaner. Heat Resistance. Avoid placing hot items on the countertop.