Installation Guide

Formica Group Technical Guide | 3

FTG-0924 | Rev1 | 02/18

DECOLEATHER

RECYCLED LEATHER VENEER BY FORMICA GROUP

FABRICATION GUIDE

OPTION 1 — INSERT IN BETWEEN THE EDGES

Have a protruding piece of plastic/metal/wood of a matching

color between the two panels or sides of leather. The piece

can be protruding by

⁄16″ and be integrated in the design

element of the panels

OPTION 2 — INVERTED “L” SHAPE BRACKET

Have a piece of metal trim inserted over the leather in

between the panels of the countertop. The metal piece is

an “L” shape with an inside corner placed between the two

panels — the “wings” of the L protrude from the outside by

⁄16″ on each of the panels.

OUTSIDE CORNER PROTECTION WITHOUT CORNER GUARDS

dECOLeather

can puncture or tear so avoid sharp object impact or scu. Exposed edges can “u” when

abraded, thus edges need to be encapsulated in metal, wood, plastic framing, edge banding, or edge protectors.