User's Manual

Getting started
Set up
1. Assembly
1. Plug the product into your cigarette power jack in the car.
2. Plug the microphone into its microphone jack.
3. Stick the microphone on the dashboard. Make sure the red spot face to
your mouth.
4. Turn on the power. The blue light is on.
2. Pair the Bluetooth carkit with your mobile phone
You pair the carkit with the phone by adding it to the pairing list in the phone.
The two devices then recognize each other when they connect.
1. Press and long hold the link button in the disconnect mode, until the red
LED flashing 4 times per second. Make sure the power is on.
Note:
You will hear 2 beeps (low high), when the device is on. The pairing
mode is after these 2 beeps. You should continually hold the button
until the red LED flashing 4 times per second.
2. Prepare your phone for turning on Bluetooth function, searching new
device, according to the phone user guide. Make sure the product is within
5m of the phone.
3. “Auto Blue” appears in the pairing list on your phone. Selects it. Key-in
the password “1234”.
4. The product connects with the phone after pairing.
Note:
You only pair the carkit with your mobile phone at the first time. You
don’t have to redo the pairing process until you want to use it with
another mobile phone.
Daily Use
1. Turn on the power
Turn on the power switch, the blue LED is on.