User's Manual

Getting started
Charging the battery
The headset has a rechargeable Lithium Polymer battery. You have 2
ways to charge the battery:
1. Charging by the AC charger
a、 Connect the charger cable to the charger connector on
headset
b、 Connect the charger to an AC wall outlet. The red LED is on,
during charge mode. It takes around 1.5 hours to fully charge
the battery. The red LED is off when the battery is full.
2. Charging by USB on the PC or notebook
a、 Connect the USB cable to the charger connector on the
headset.
b、 Connect the other end of USB cable to the USB port on the PC
or notebook
c、 The RED LED is on when the headset is charged. It takes
about 1.5 hours to fully charge the battery. The red LED is off
when the battery is full.
Battery Low
When the battery is low, the RED flashes, the headset will product a
warning sound.
Switch ON/OFF
1. Switch ON: in off mode, press and hold the main bottom for 1
second to switch on. The headset produces 2 beeps, (low-hi). The
blue LED flashes 5 times.
2. Standby mode: Headset switch to standby mode from link mode
automatically, to save the power. The blue LED flashes once in each
3 seconds.
3. Switch OFF: in standby mode, press and hold the main bottom for
1 second. The blue LED is off.
Pairing
You pair the headset with the phone by adding it to the pairing list in
the phone. The two devices then recognize each other when they
connect.