User's Manual

IP Settings (Bridge)
This is available only under Bridge network mode. Open “IP Settings (Bridge)” in “System” as below
to configure the parameters for LAN which connects to the LAN port of KWG-O6020-I. In this page,
users may change the settings for IP Address, Subnet Mask, and DHCP Server.
Figure 5
IP Settings (Bridge)
Obtain IP Address Automatically
: If a DHCP server exists in your network, you can check this option,
thus KWG-O6020-I is able to obtain IP settings automatically from that DHCP server.
Use Fixed IP Address
: Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for KWG-O6020-I manually. Make sure the specified IP address is
unique on your network in order to prevent IP conflict.
IP Settings (Router)
This is available only under Router mode. Open “IP Settings (Router)” in “System” as below to
configure the parameters of KWG-O6020-I for accessing the Internet.