User's Manual

Figure 6
IP Settings (Router)
WAN Settings:
Specify the Internet access method to Static IP, DHCP or PPPOE. Users must enter
WAN IP Address, Subnet Mask, Gateway settings provided by your ISPs.
LAN Settings:
When DHCP Server is disabled, users can specify IP address and subnet mask for
KWG-O6020-I manually. Make sure the specified IP address is unique on your network in order to
prevent IP conflict. When DHCP Server is enabled, users may specify DHCP IP Address Range,
DHCP Subnet Mask, DHCP Gateway and Lease Time (15-44640 minutes).
!!!Warning:
z In AP mode, KWG-O6020-I must establish connection with another wireless device before it is set to
Router mode. In Router mode, it is impossible for users to access device via wired port, for WAN is on
wired port and LAN is on wireless port. Users can access device through the wireless device
connected with KWG-O6020-I.
z In CPE mode, users can access KWG-O6020-I via its wired port, for WAN is on wireless port and
LAN is on wired port when device is set to Router mode.
z WDS mode and AP Repeater mode are similar to AP mode when device is set to Router mode; WAN
is on wired port and LAN is on wireless port. Thus users must also connect KWG-O6020-I with
another wireless device before it is set to Router mode and access KWG-O6020-I via the connected
wireless device.