User's Manual

Basic Wireless Settings
Open “Basic Settings” in “Wireless” as below to make basic wireless configuration.
Figure 15
Basic Wireless Settings
Disable Wireless LAN Interface
Check this option to disable WLAN interface, then the wireless module of KWG-O6020-I will stop
working and no wireless device can connect to it.
Wireless Mode
Four operating modes are available on KWG-O6020-I.
Wireless Client:
The KWG-O6020-I is able to connect to the AP and thus join the wireless network
around it.
AP:
The KWG-O6020-I establishes a wireless coverage and receives connectivity from other wireless
devices.
Bridge:
The KWG-O6020-I establishes wireless connectivity with other APs.
AP Repeater:
The KWG-O6020-I servers as AP and Bridge at the same time. In other words, the
KWG-O6020-I can provide connectivity services for CPEs under WDS mode.
Wireless Network Name (SSID)
This wireless network name is shared among all associated devices in your wireless network. Keep it
identical on all those devices. Note that the SSID is case-sensitive and can not exceed 32 characters.