User's Manual

Channel Mode
Two levels are available: 20MHz and 40MHz. The latter one can enhance the data rate more
effectively, but takes more bandwidth, thus cause potential interference.
Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
802.11g transmissions. However, it may decrease wireless network performance. Compared to
CTS-Self; the transmission amount of CTS-RTS is much lower.
Site Survey
Under wireless client mode, KWG-O6020-I is able to perform site survey, through which, information
on the available access points will be detected.
Open “Basic Settings” in “Wireless”, by clicking the “Site Survey” button beside “Wireless Mode”
option, the wireless site survey window will popup with a list of available wireless networks around.
Select the AP you would like to connect and click “Selected” to establish connection.
Figure 16 Site Survey