Manualshelf

User's Manual

ManualsBrandsFormosa Wireless Systems ManualsElectronics802.11n 2.4G WLAN CUSTOMER PREMISES EQUIPMENT
31323334353637383940
to private.
Trap Destination
Specify the IP address of the station to send the SNMP traps to.
Trap Community
Specify the password sent with each trap to the manager. By default, it is set to public and allows all
requests.
Configure SNMPv3 User Profile
For SNMP protocol version 3, you can click “Configure SNMPv3 User Profile” in blue to set the
details of SNMPv3 user. Check “Enable SNMPv3 Admin/User” in advance and make further
configuration.
Figure 22
Configure SNMPv3 User Profile
User Name
Specify a user name for the SNMPv3 administrator or user. Only the SNMP commands carrying this
user name are allowed to access KWG-O6020-I.
Password
Specify a password for the SNMPv3 administrator or user. Only the SNMP commands carrying this
password are allowed to access KWG-O6020-I. Confirm Password Input that password again to make
sure it is your desired one.