User Manual

RF132, Presenter with RF wireless technology

Installation and operation

1. Open the battery cover and Install batteries

Open the battery cover of presenter and take off the receiver with 45

degrees angle from the receiver dock before you start to use.

(Please insert the receiver into the receiver dock of the presenter with

45 degrees angle after the presentation. The Power Switch inside the

presenter dock will turn off the power when you put the receiver in)

Put in two AAA batteries and close the battery cover.

Power on/off button

Receiver dock

2. Install Receiver

Plug receiver into the USB port of your computer. Please put your

presenter closed to the receiver around within distance 5 cm and press

any button of the presenter around 3 seconds except laser button, the red

indicator of presenter will keep flash if quick-link is successful. If the

receiver is inserted correctly, the blue indicator of receiver will flash once