User's Manual

RC240 3D Mouse Presenter V1.3

Group Vibrating

You can use another Presenter to inform the orator “time is end” of a

presentation. We call this feature as “Group Vibrating” and you need

to have two (or more) Presenters linked with the Receiver at the same

time. Turn ON both Presenters. Press and hold the FEATURE key

of one Presenter for more than 2 seconds, all the Presenters are

vibrating.

Anti Shaking

When you use Presenter 3D Mouse to click (either

single clicking or double clicking) small objects

(e.g., Minimize, Restore Down, or Close, the

small objects on the up-right corner), the hand

shake will cause the movement and it might be

difficult to make a successful clicking. The

Presenter provides an Anti Shaking feature to

reduce the effect of your hand movement during the clicking.

To enable the Anti Shaking function, right

click the

aimMaster™ Pro

icon . Select

the “Anti Shaking” tab, you will find 5

choices in the pull down menu. Where

OFF means turn off the Anti Shaking. In the

beginning, you may try to use “2” to see if it

helps.

Link Presenter with Receiver

The Presenter and the Receiver are linked before the shipment.

However, once you change the Receiver, or you add one more

Presenter, you should go through the following steps to link the

Presenter with the Receiver.

1. Insert Receiver to USB port of computer system.