User's Manual

RC240 3D Mouse Presenter V1.3
14
2. Press and hold both OK and FEATURE keys of Presenter for
around three seconds, until LASER key light flashes purple
light.
3. Release both keys and click any key. The Blue LED of Receiver
blinks.
The Presenter and Receiver are linked successful and ready for use.
Click any key to see if this Receiver is linked correctly. The blue light
on the Receiver will flash when you click the Receiver key.
Advance Mode
Right click the aimMaster™ Pro icon
on the System Tray and click
“Mode” tab from the pop-up menu.
Choose the “Advance Mode” tab.
Advance Mode has all the functions
in Standard Mode plus eight more
user defined motion keys. You can
enter up to 8 commands to your computer -- up to 3 key codes could
be pre-defined for each Motion Key. And then use the one of the
motion actions to send out the assigned key
codes to your application.
Change Hotkey Map
Right click the
aimMaster™ Pro icon from System
Tray and select “Hotkey Setting” tab from pop-up
menu. You will see a dialogue window as shown
below: