User's Manual

RC240 3D Mouse Presenter V1.3
21
Q & A
1. Language:
Q: Does software, aimMaster™ Pro , support the language of my
country?
A: Please move the cursor to the aimMaster™ Pro icon on the
System Tray. Right Click this icon, and select the “Language”
Tab. You will find a list of the languages. Pick up the one you
need. The user interface will be changed to this language.
2. aimMaster™ Pro is not installed:
Q: If I don’t install the software, aimMaster™ Pro , can I use
RC240?
A: Yes, you can use a lot of functions: Mouse (includes Left and
Right keys), Page Up, Page Down, Scroll Up, Scroll Down,
Volume Up and Volume Down (the small volume window on the
right up corner is not shown). However, the Virtual Laser Pointer
is not working. You can use Mouse cursor as the Virtual Laser
Pointer.
3. Group Vibration
Q: I use another RC240. I press and hold the FEATURE key for 3
seconds trying to let the original Presenter vibrating. But it does
not work.
A. First, you should link the second Presenter with the original
Receiver. Please place the second Presenter close to the
Receiver then press and hold both the FEATURE and OK keys
of the second Presenter for more than 3 seconds until the
purple light on the LASER key is flashing. Press any key to
confirm if it is linked.
Also, both Presenters should be turned on.
4. Slide Show:
Q: Sometimes when I click the POWER key to enter the slide show,
the computer is not responsive.
A. The window of your PowerPoint file is not an active window.
Perhaps you just did some actions on the aimMaster™ Pro icon
on the System Tray of your computer. In this case, the window