Instructions / Assembly

External PVC End Cap

FORMUFIT External End Caps connect to a single piece of PVC pipe and gives a ﬁnished and

clean look to projects and applications that have open ended pipe. To connect this product

to PVC pipe, follow the instructions shown below.

Assembly

Securing

For permanent and strong connections, it is!recommended to use!PVC cement/solvent to

attach the PVC pipe and the External Flat Cap.

You can also temporarily connect this cap by driving a self-tapping screw where the pipe and

cap meet, or apply electrical tape over the end of the pipe before inserting into the cap for a

temporary, yet strong connection.

https://formuﬁt.com

PRODUCT INSTRUCTIONS

Slip the open end of the cap over the

PVC pipe.

Push or tap into place until the pipe

hits the stop inside of the cap.