Instructions / Assembly

Slip Sling Tee

FORMUFIT Slip Tees connect two (2) segments of PVC Pipe perpendicularly and allow one

segment of pipe to rotate or slide along another. To connect this product to PVC pipe, follow

the instructions shown below.

https://formuﬁt.com

PRODUCT INSTRUCTIONS

Line up and insert one end of a PVC

Pipe inside the ‘static’ socket end of

the Slip Tee.

Push or tap into place until the pipe

is fully seated.

Insert another PVC Pipe into the slip

end of the Slip Tee.

Push through until the pipe emerges

from the opposite end of the Slip

Tee.

PAGE 1
PRODUCT INSTRUCTIONS Slip Sling Tee FORMUFIT Slip Tees connect two (2) segments of PVC Pipe perpendicularly and allow one segment of pipe to rotate or slide along another. To connect this product to PVC pipe, follow the instructions shown below. 1 Line up and insert one end of a PVC Pipe inside the ‘static’ socket end of the Slip Tee. 3 Insert another PVC Pipe into the slip end of the Slip Tee. All rights reserved.
PAGE 2
Use and Adjustment A Use the slip tee as a sliding mechanism that will move along the length of the pipe. B Use the slip tee as a rotating hinge, to allow for openable doors or lids in PVC Pipe projects. C Use the slip tee as support by inserting a screw between the slip socket and the pipe to temporarily attach in place. Securing For permanent and strong connections, it is recommended to use PVC cement/solvent to attach the PVC pipe and the slip tee on the static socket.