Specification Sheet

CONTROL PANEL ELECTRODE CHART
POLARITY CHART
TYPICAL SET-UP
ACCESSORIES (Not Included)
18 0 ST
ITEM# 291
230V
120V
1. Process selector switch
2. Amperage adjustment knob
Excellent performance for most E6010, E6011,E7014 & E7018
electrodes.
Note: E6010: General welding acceptable but not
recommended for open root pipe or long arc applications.
EP = Electrode Positive • EN = Electrode Negative
Distributed by:
Attach the ground clamp to the
workpiece
Note: The Forney Easy Weld
180 ST is a DC only power source.
DIAMETER AMPS
Inch Millimeter Amps
E6010 &
E6011
3/32 2.4 30-75
1/8 3.2 35-120
5/32 4.0 80-160
E6013
1/16 1.6 20-50
3/32 2.4 40-90
1/8 3.2 50-130
5/32 4.0 90-180
E7014
3/32 2.4 40-90
1/8 3.2 60-130
5/32 4.0 90-180
E7018
3/32 2.4 50-100
1/8 3.2 80-160
5/32 4.0 90-180
ELECTRODE DC PENETRATION
E6010
EP DEEP
E6011
EP DEEP
E6013
EP-EN SHALLOW
E7014
EP-EN MEDIUM
E7018
EP-EN MEDIUM
NICKEL
EP SHALLOW
STAINLESS STEEL
EP SHALLOW
ITEM# DESCRIPTION
85659 Air Cooled 150A 17FV Series (Flex & Valve) TIG Torch 12.5’ with Dinse adapter
85364 Argon/CO2 Flow meter, CGA580 Inlet Connection
56000 200 Amp Tong Style Electrode Holder (replacement part)
54400 300 Amp Steel EG series Ground Clamp
93097 Deluxe Electrode Storage Container
70600 Chipping Hammer, Spring Handle
1
2
3 4
3. Power indicator light
4. Over temp indicator light
GROUND CLAMP
WORKPIECE
ELECTRODE HOLDER