Specification Sheet

Safety Latest Revision: May 2017
Data Page 1 of 7
Sheet Forney Industries, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION:
PRODUCT NAME: Solder, General Purpose Repair, Acid Core
FORNEY SKUs: 38116
MANUFACTURER: Forney Industries, Inc.
2057 Vermont Drive
Fort Collins, CO 80525
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
EMERGENCY TELEPHONE NUMBER: 800-535-5053
___________________________________________________________________________________
2. HAZARD IDENTIFICATION:
Emergency Overview: This product is normally not considered hazardous as shipped. Avoid eye contact or inhalation of
dust from the product. When this product is used in a welding process, the most important hazards are welding fumes and
heat.
Classification of the Substance/Mixture
CLP/GHS Classification (1272/2008):
Skin Irritation, Category 2
Eye Irritation, Category 2A
Specific Target Organ Toxicity (Single Exposure), Category 3
EU Classification (67/548/EEC):
Irritant (Xi), R36/37/38
Hazardous Classification per 29CFR 1910.1200 (Rev. July 1, 2012):
Skin Irritation, Category 2
Eye Irritation, Category 2A
Specific Target Organ Toxicity (Single Exposure), Category 3
Labelling:
Symbols:
Signal Word: Warning
Hazard Statements:
H315 – Causes skin irritation.
H319
– Causes serious eye irritation.
H335
– May cause respiratory irritation.
Precautionary Statements:
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash skin and hair thoroughly after handling.
P271 – Use only outdoors or in a well-ventilated area.
P280 – Wear protective gloves/eye protection/face protection.
P302+P352 – IF ON SKIN: Wash with plenty of soap and water.
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P312 – Call a POISON CENTER or doctor/physician if you feel unwell.
38116