Assembly Guide Guida All’assemblaggio Guide de montage
Table of Contents / Sommario / Sommaire Forno Venetzia Wood Burning Oven Assembly Guide ..........................................................................................................................2 Storing Your Forno Venetzia Wood Burning Oven .................................................................................................................................7 Guida All’assemblaggio ...................................................................................................
Product Specifications Specifiche del Prodotto Spécifications du Produit A 77” / 195.6 cm F 9.85” / 25 cm B 58.5” / 148.6 cm G 18” / 46 cm C 39.5” / 100 cm H 21.5” / 54.5 cm D 30” / 76 cm I 33” / 84 cm E 6” / 15.
Assembly Guide 2
1. Carefully unpack the oven legs and all other contents found inside the box taking care not to scratch the various parts. Do not dispose of the polystyrene as you will need this during assembly to avoid scratching the oven and parts. 2. Next, ensure you have all the necessary parts and components.
1 – Chimney Cap 1 – Chimney Pipe 1 – Retractable Oven Tool Holder 1 - Handle 1 – Oven Body 1 – Oven Door 1 – Folding Shelf 1 – Middle Shelf 4 – Legs 1 – Base with wheel brackets 2 – Swivel Wheels 2 – Fixed Wheels 3. Carefully remove the laser film protective covering. Avoid using sharp or metal objects as to not damage the finish of the oven. 4. Position the polystyrene packaging on the floor and place the parts on it to avoid scratches.
8. Turn the cart back on its side and attach the middle shelf to the partially assemble cart frame. Ensure the screw holes on the side of the middle shelf are on the same side as the holes in the legs for the handle. 9. Turn the now assembled cart right side up. 10. Attach the side arms between two legs on each side of the cart. Ensure the side arm with the screw holes is attached to the same side as the legs with the holes for the handle. 11. Carefully remove the bricks from the inside of the oven.
19. If the folding shelf is not level when extended, gently push down on the rounded corners of the folding shelf. The folding shelf is designed to tilt slightly upward in order to support the weight of items that may be placed on it during use. 20. Attach the retractable tool holder using 4 plastic head screws. 21. To extend the retractable tool holder slide the tool holder upward until the plastic head screws can be steered into the “hooks” on the left side of the slot in the tool holder. 22.
23. To retract the tool holder, remove all tools, and loosen all 4 plastic head screws. Now lift the tool holder slightly to take it off the “hooks” and gently allow it to slide down in to the storage position. 24. Slide the chimney pipe into the flue opening on the top of the oven. Ensure it is completely in place and straight. 25. Slide the chimney cap into the top of the chimney pipe. Ensure it is also completely inserted into the chimney pipe. 26. Carefully place the bricks back inside the oven.
Guida all’assemblaggio 8
1. Togliete con attenzione dall’imballo le gambe del forno e tutte le altre parti, cercando di evitare che si graffino. Non gettate via il polistirolo perché vi servirà durante l’assemblaggio proprio per proteggere le varie parti da eventuali graffi. 2. Assicuratevi di avere tutti i componenti necessari.
Lista minuteria per Forno Venetzia Pronto 500 Prog Nome Misura Materiale ressi vo Viti a 1 brugola M6*16 Acciaio al esagonali carbonio Foto Quantità 2 3 4 10 Chiave a brugola Viti con testa di plastica Blocchi ruote
1 – Comignolo 1 – Canna fumaria 1 – Porta attrezzi retrattile 1 -‐ Maniglia 1 – Corpo del forno 1 – Porta del forno 1 – Ripiano pieghevole 1 – Ripiano intermedio 4 – Gambe 1 – Base con supporti ruote 2 – Ruote rotanti 2 – Ruote fisse 3.
8. Girate il carrello sul fianco e fissate il ripiano intermedio alla struttura del carrello parzialmente assemblato. Assicuratevi che i fori per le viti sul lato del ripiano intermedio siano sullo stesso lato dei fori delle gambe per la maniglia. 9. Riportate il carrello alla posizione eretta. 10.
19. Se il ripiano pieghevole non è a livello quando viene esteso, premete delicatamente sugli angoli arrotondati del ripiano stesso. Il ripiano pieghevole è disegnato per piegarsi leggermente verso l’alto in modo da supportare il peso degli oggetti su di esso posizionati durante l’uso. 20.
23. Per ritrarre il porta attrezzi, rimuovete tutti gli attrezzi e allentate le 4 viti con testa in plastica. Sollevate poi leggermente il porta attrezzi per estrarlo dai ganci e fatelo scorrere lentamente verso il basso in posizione di riposo. 24. Infilate la canna fumaria nel condotto sopra il forno.
2. Rimuovete gli attrezzi dal porta attrezzi e spingetelo delicatamente verso il basso in posizione di riposo. Non lasciate cadere il porta attrezzi, perché ciò potrebbe danneggiare sia il porta attrezzi che il forno. 3.
Guide de montage 16
1. Déballez soigneusement les pattes du four et toutes les autres pièces contenues dans la boîte en prenant soin de ne pas les rayer. Ne jetez pas le polystyrène car vous en aurez besoin lors du montage pour ne pas égratigner le four et les pièces. 2. Ensuite, assurez-‐vous d’avoir toutes les pièces et composants nécessaires.
1 – Mitre de cheminée 1 – Tuyau de cheminée 1 – Support à ustensiles rétractable 1 -‐ Poignée 1 – Corps du four 1 – Porte du four 1 – Tablette pliante 1 – Tablette centrale 4 –Pattes 1 – Base avec fixations de roues 2 – Roues pivotantes 2 – Roues fixes 3.
8. Retournez le chariot et fixez-‐y la tablette centrale au cadre de chariot partiellement assemblé. Assurez-‐vous que les trous de vis sur le côté de la tablette centrale sont du même côté que les pattes avec trous pour la poignée. 9. Remettez debout le chariot maintenant assemblé. 10.
19. Si la tablette pliante n’est pas de niveau lorsque tirée, poussez doucement ses coins arrondis vers le bas. La tablette pliante est conçue pour s’incliner légèrement vers le haut afin de supporter le poids des articles y étant posés. 20.
. Pour rétracter le support à ustensiles, enlevez tous les ustensiles et dévissez toutes les quatre vis à tête plastique. Soulevez maintenant le support à ustensiles pour le sortir des « crochets » et glissez-‐le doucement vers le bas en position de rangement. 24.
www.fornovenetzia.com email: info@fornovenetzia.