Use and Care Manual

10
Door handle installation (continued)
Oven rack installation
Chef Door: Only for FBOEL1340-30: Lower oven
Step 1:

caps located at the back of the oven door. Be careful not
to scratch the enamel. DO NOT THROW AWAY the cap
Step 3:
Position the handle holder correctly to accept the screw
bolt on the outside of the oven door, then tighten the
screw. Do not over tighten the screw.
Step 2:
To reach the embedded screw, insert the screwdriver
into the hole and push the screw forward until the
threads appear on the other side.
Step 4:
Repeat steps 1-3 for the other doors, then replace the
black rubber cap.
Right Side
Left Side
Right Side
Left Side
1-Open the oven door 2- Put the baking rack to the center
position of the side rack. Raise the baking
rack a little bit so that the steel ball can
cross the side rack.
3- Push the baking rack smoothly all the
way into the oven cavity.