Use and Care Manual


To remove the oven door:
1. Open the oven door completely.
2. Lift up the hinge latch on each side to open.
3. Close the oven door as far as it will shut.
4. While grasping both outside edges of the oven door, lift up on the door.
5. Continue to push the top of the door closed while pulling the bottom of the door out of the hinge receivers in the door
frame.
Left hinge
Right hinge Open
STEP 3: Install oven
1. Using two or more people, grasp the ceiling of the oven cavity and lift the oven onto a table or platform even with the
cutout opening.
IMPORTANT: 
installation instructions, municipal building codes, electrical wiring regulations.
IT IS RECOMMENDED TO HAVE AT LEAST 2 PEOPLE TO ASSIST WITH THE INSTALLATION PROCESS.
TO INSTALL YOUR WALL OVEN, FOLLOW THESE STEPS CAREFULLY:
Step 1:
Note: Do not use the handle or any portion of the front frame for lifting.
1. Move the packaging to the location where you wish to install and place the cardboard under it to avoid damaging to

2. Remove all the shipping materials and tapes from the wall oven.
3. Put the literature and hardware packaging aside.
4. Take out the racks and other parts, and place them in a safe location.
5. Move the oven on the cardboard near where it will be installed.
Step 2: Remove the oven door (CHEF DOOR ONLY)
IMPORTANT: The oven door is heavy and fragile, and the door front is glass. To avoid oven door glass breakage, use
both hands, and grasp only the sides of the oven door to remove.
Installation Instruction
NOTE: The platform must be able to support the following weight:
• Single Oven : 178.5 lb (81 kg)
• Double Oven: 295 lb (134 kg)
