Use and Care Manual

18
Installation Instruction (continued)
Ungrounded Neutral
A
B
C
D
H
I
G
F
E
A

B
Black Wires
C
Red Wires
D
Cable from Oven
E
UL listed or CSA Approved
Conduit Connector
F
Ground (Green or Bare) Wire
G
UL Listed Wire Connectors
H
Neutral (White)Wires
I
House Electrical Supply
1. Disconnect power
2. Connect the 2 black wires b together using a UL listed wire connector.
3. Connect the 2 red wires c together using a UL listed wire connector.
4. Untwist white wire from green (or bare) ground wire coming from the oven.
5. Connect the 2 neutral (white) wires h together using a UL listed wire connector.
 Connect the ground (green or bare) wire f from the oven cable to the ground

7. 
STEP 5: Mount the oven
1. Slide the oven completely into the cabinet until the back surface of the front frame touches the front wall of the cabi-
net. Center the oven within the cabinet cutout. NOTE: Push against seal area of the oven front frame when pushing
the oven into the cabinet. Do not push against the outside edges.
A Mounting Frame
B Mounting Frame Hole
2. 
holes through the holes, and into the front wall of the cabinet.
3. 
over-tighten screws.
4. Replace the rack and reconnect the power to the oven.