Owner Manual

1
Door trays
1. Depending on model the medium door trays can be removed.
2. Remove all stored food of the relevant door trays before.
3. Lift the door tray vertically.
4. Insert the door tray by proceeding vice versa.
The door trays can be removed and inserted for cleaning as shown above (depending on
model)
Glass shelves
1. The glass shelves can be inserted into different positions 15 if required.
2. Pull the glass shelf on the guide rails forward carefully and lift it
slightly until you can remove it.
3. To reinsert the glass shelf, push it back in position on the guide rails
carefully.
4. Ensure that the area is free and has no obstacles
The glass shelves can be removed and inserted for cleaning as shown above (depending on
model).
The freezer
WARNING! Do not eat food which is still frozen. Children should not eat ice-cream straight
from the freezer. The coldness can cause injuries in the mouth.
WARNING! Contact with frozen food, ice and metal components in the freezer
compartment can cause injuries similar to burns
CAUTION! Do not put any bottled or canned beverages (neither still nor carbonated) into
the freezer compartment of the appliance as their containers could explode .
The freezer is intended for long-term storage of food. Please observe the advice for max. storage
time on the packaging of frozen food products. Do not refreeze defrosted food.
Shelves
Fish, meat, ice crème etc. The shelves are removable for cleaning.
Adjust the shelves relevant to your needs.
Drawer Packaged frozen foodstuffs.
Door trays
Small pieces of frozen food, short time storage, etc. Do not place too many
heavy items in the door trays.
Protect fresh food you want to freeze using aluminum foil, cling film, air and water tight
plastic bags, polyethylene containers or other suitable plastic containers with a lid.
Leave some free space between the single pieces of frozen food as proper air circulation is
required.
The food is frozen completely after 24 hours (you find the relevant information about the
maximum freezing capacity within 24 hours in chapter TECHNICAL DATA).