Instruction Manual

1
CAUTION Handle carefully when removing and replacing gas components. Use proper support to prevent
damage to components.
IMPORTANT: Each injector has a number indicating its flow diameter printed on the body. Consult the table below for
matching nozzles with cooktop burners.
FFSGS6282-30
FFSGS6275-30
NG 1.45 1.45 NG 1.45 1.4*2+0.8 1.45
LPG 0.9 0.9 LPG 0.9 0.72*2+0.5 0.9
NG 2.0 2.0 NG 2.0 2.0
LPG 1.18 1.18 LPG 1.18 1.18
STEP 3: Broiler Burner (up burner inside the oven)
STEP 2: Cooktop Burners
a. Remove cooking grills and burner caps.
b. Lift off outer burner spreader and burner bases.
c. Remove the factory installed natural gas nozzles from the center of the nozzle holders
using a 7mm socket wrench. Replace the LP injector in each nozzle holder. Tighten each
injector properly.
Do not to over tighten the injector.
Socket wrench
Back cover plate
Broil
Oven