Instruction Manual

1
A. Open the back cover plate by removing the screws.
B. Use the open wrench to remove the screws from pipe connector.
C. Take out the 0.95 ULPG injector from the part bag and replace the 1.6 NG injector by the 0.95 ULPG injector.
D. Loosen the screws and adjust the diameter of the air inlet hole to 0.24”
E. Fix the pipe connector and the gas inlet by the screws.
Injector diameter for broiler burners:
NG ---1.6 LPG --- 0.95
STEP 4: Oven Burner (bottom burner of the oven)
Broil
Remove screws
ULPG Injector
Remove
Install
Release screws
Broil
Install