Installation Guide
10
Be sure that the electrical connection and wire size are adequate and in conformance with CSA Standard C22.1, Cana-
dian Electrical Code, Part 1 - latest edition, and all local codes and ordinances.
A copy of the above code standards can be obtained from:
Canadian Standards Association
178 Rexdale Blvd.
Toronto, ON M9W 1R3
CANADA
• Do not use an extension cord.
IMPORTANT: This appliance shall be installed only by authorized persons and in accordance with the
wiring regulations, local water supply regulations.
Electrical Requirements (continued)
Step 2: Imstall Anti-Tip Bracket
Step 1: Unpack Range
Electrical Weight Hazard
Use two or more people to move and install the range. Failure to do so can result in back or other injury.
WARNING
1.
anything until the installation is complete.
2. Remove oven racks and parts package from oven and shipping materials.
3.
range when it is laid on its back.
4.
5. Remove cardboard bottom.
NOTES:
• The leveling legs can be adjusted while the range is on its back.
•
or hardboard.
NOTE: An anti-tip bracket kit is provided with the range.
WARNING: Tip Over Hazard
• A child or adult can tip the range and be killed.
• Connect anti-tip bracket to rear range foot.
• Reconnect the anti-tip bracket if the range is moved.
• Failure to follow these instructions can result in death or serious burns to children and adults.