User manual

Sensitive function
For gentle drying of fabrics that are frequently
worn. Programme starts on full heat setting,
which is then reduced as the programme
progresses to be kind to the washing.
To activate it:
1. Choose the drying programme.
2. Press Sensitive button (2) - the LED
above is on.
To deselect function press again Sensitive
button (2). The LED above is off.
The Delicate (Schon) and Sensitive func-
tions cannot be selected together.
Long anti-crease (Knitterschutz Plus)
function
This function prolongs anti-crease phase
what gives 90 min. in total. The drum rotates
in intervals during this phase. The laundry
thereby remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press Long anti-crease (Knitterschutz
Plus) button (3) - the LED above is on and
display shows the following icon
.
If this additional function is selected, the anti-
crease phase at the end of the drying cycle
is lengthened by 60 minutes. The laundry can
be removed at any time during the anti-
crease phase.
To deselect function press again Long anti-
crease (Knitterschutz Plus) button. The LED
above is off and 90 from the icon disappears
.
Buzzer (Signal) function
The appliance is supplied with the Buzzer
(Signal) function deactivated.
The buzzer sounds or plays a tune when ac-
tivated during:
–cycle end
– anti-crease phase and when phase starts
or ends
– cycle interruption by a warning
–alarm
To activate it:
1. Choose the drying programme.
2. Press Buzzer (Signal) button (4) - the LED
above is on.
To deselect function press again Buzzer (Sig-
nal) button (4). The LED above is off.
Time (Zeitwahl) function
To select the programme duration after set-
ting the Time programme (Zeitprogramm) .
You can select a programme duration from
10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the Time
programme (Zeitprogramm). The blinking
10' appears in the display. (correspond-
ing to the cooling phase).
2. Press the Time (Zeitwahl) button (5) re-
peatedly until the desired programme du-
ration is shown in the display, e.g.
for
a programme of 20 minutes.
If the programme duration is not selected,
the duration is automatically set to 10 mins.
Delay start (Zeitvorwahl)
With the Delay start (Zeitvorwahl)
button (7), you can delay the start of
a programme by between 30 mi-
nutes (30') and a maximum of 20
hours (20h).
1. Select the programme and additional
functions.
2. Press the Delay start (Zeitvorwahl) button
(7) as many times as necessary until the
required start delay appears on the dis-
play, e.g.
if the programme is to be
started in 12 hours.
If the display is showing 20h and you
press the button again, the time de-
lay will be cancelled. The display will
show 0'and then the duration of the
selected programme.
3. To activate the delay timer, press the
Start / Pause button (6). The amount of
time remaining until the programme is set
to start is continuously displayed (e.g.
15h, 14h, 13h, … 30' etc).
CHILD LOCK function
The child lock can be set to prevent a pro-
gramme being accidentally started or a pro-
gramme in operation being accidentally
changed. The child lock function locks all
buttons and the programme knob. The child
lock can be activated or deactivated by hold-
ing down the Long anti-crease (Knitterschutz
Plus) (3) and Buzzer (Signal) (4) buttons si-
multaneously for 5 seconds.
72