User manual

7.
To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8. Remove fluff from the entire filter area. It
is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh fil-
ter into the brackets on the loading door
until they snap into place.
10. Re-insert fine strainer.
11.
Press against the large mesh filter until it
locks into the interlock.
If the fine strainer is not fitted, the large
mesh filter will not snap into place and
the loading door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth imme-
diately after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying
cycle.
If the water reservoir is full, an active pro-
gramme will break off automatically and the
empty container
icon on the display will
light up. In order to continue the programme,
the water reservoir must first be emptied.
Warning! The condensed water is not
suitable for drinking or for preparing
foodstuffs.
1.
Take out water reservoir completely.
2.
Pour condensed water out into a basin or
similar receptacle.
3. Refit water reservoir.
If the programme has been interrupted as
a result of the water reservoir being full:
Press the Start / Pause button to contin-
ue the drying cycle.
The water reservoir has a volume of ap-
prox. 4 litres. This is sufficient for around
7 kg of laundry which has previously
been spun at 1000 revolutions/ minute.
The condensed water can be used as
distilled water, e.g. for steam ironing.
However first filter the condensed water
(e.g. with a coffee filter) to remove any
residue and small pieces of fluff.
75