32962020.qxd 22/05/2008 16.
132962020.qxd 22/05/2008 16.00 Pagina 2 2 Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
132962020.qxd 22/05/2008 16.
132962020.qxd 4 22/05/2008 16.
132962020.qxd 22/05/2008 16.
132962020.qxd 6 22/05/2008 16.00 Pagina 6 Safety information Instruction for the user Safety information Prior to using for the first time ● ● ● ● ● The safety of appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. You MUST read them carefully before installing or using the appliance.
132962020.qxd 22/05/2008 16.00 Pagina 7 Safety information ● ● ● 7 Do not use your washing machine to wash articles with whalebones, material without hems or torn material. Always unplug the appliance and turn off the water supply after use, clean and maintenance. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
132962020.qxd 8 22/05/2008 16.00 Pagina 8 Safety information ● ● ● Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
132962020.qxd 22/05/2008 16.00 Pagina 9 Product description 9 Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. The ECO valve system allows total use of detergent and reduces water consumption so saving energy. 1 2 3 Detergent dispenser drawer Control panel Door opening handle 4 5 6 Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for detergent used for prewash.
132962020.qxd 10 22/05/2008 16.00 Pagina 10 Control panel Control panel Henceforth the programme selector dial, the buttons and the display will be indicated with the numbers given in this table.
132962020.qxd 22/05/2008 16.00 Pagina 11 Control panel 11 Display (7) 7.2 7.3 7.1 7.1 Duration of selected programme : After selecting a programme, the duration is displayed in hours and minutes (for example 2.05). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
132962020.qxd 12 22/05/2008 16.00 Pagina 12 Control panel Indicator pilot lights (10) After having pressed the button 8, the WASHING 10.1 pilot light (10.1) comes on. When the pilot light 10.1 comes on this means that 10.2 the machine is operating. The DOOR pilot light (10.2) indicates if the door can 10.3 be opened: ● light on: the door cannot be opened. ● light blinking: the door is opening. ● light off: the door can be opened.
2962020.qxd 22/05/2008 16.00 Pagina 13 Use 13 First Use Ensure that the electrical and water connections comply with the installation instructions. Remove the polystyrene block and any material from the drum. Pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 90° or 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
132962020.qxd 14 22/05/2008 16.00 Pagina 14 Use Daily Use Load the laundry 1. Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 2. Close firmly the door. You must hear a click during closing. Attention! Do not embed the laundry between the door and the rubber joint. Measure out the detergent and the fabric softener Your new appliance was designed to reduce water, energy and detergent consumption. 1.
132962020.qxd 22/05/2008 16.00 Pagina 15 Use 15 Select the required programme by means of programme selector dial (1) The machine is now switched on. You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»). Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g.
132962020.qxd 16 22/05/2008 16.00 Pagina 16 Use Programme option buttons Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the button 8. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
132962020.qxd 22/05/2008 16.00 Pagina 17 Use 17 SUPER QUICK: by pressing this button twice, the relative pilot light remains lit, the washing duration will be reduced to wash lightly soiled laundry or items that have been used or worn for a short time. On the display the decreased washing time shows up. Select the START/PAUSE (Button 8) To start the selected programme, press the button 8, the corresponding red pilot light stops blinking. The pilot light 10.
132962020.qxd 18 22/05/2008 16.00 Pagina 18 Use Cancelling the delayed start ● set the washing machine to PAUSE by pressing the button 8; ● press button 9 once until the symbol 0’ is displayed; ● press the button 8 again to start the programme. Important! ● The selected delay can be changed only after selecting the washing programme again. ● The door will be locked throughout the delay time.
132962020.qxd 22/05/2008 16.00 Pagina 19 Use 19 Opening the door after the programme has started First set the machine to pause by pressing the button 8. Wait for some minutes until the pilot light 10.2 goes off and the door can be opened. If the DOOR remains locked and the pilot light 10.2 is on, this means that the machine is already heating or that the water level is too high. In this case the door can not be opened.
132962020.qxd 20 22/05/2008 16.00 Pagina 20 Washing programmes Washing programmes Programme/ Temperature Type of laundry COTTONS Options Description of programme White and coloured cotton (normally soiled items) SPIN, RINSE HOLD, PREWASH, STAIN*, SENSITIVE, TIME SAVING**, EXTRA RINSE Main wash Rinses Long spin Max. load kg 6 ** Red.
132962020.qxd 22/05/2008 16.
132962020.qxd 22 22/05/2008 16.00 Pagina 22 Programme information Programme information EASY IRON Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses. WOOL/SILK HANDWASH Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol .
132962020.qxd 22/05/2008 16.00 Pagina 23 Preparing the wash cycle 23 Preparing the wash cycle Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 95° or 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...). 60°/50° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas.
132962020.qxd 24 22/05/2008 16.00 Pagina 24 Preparing the wash cycle Maximum loads Recommended loads are indicated in the washing programme charts. General rules: Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full; Delicate fabrics and woollens: drum no more than one third full. Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size.
132962020.qxd 22/05/2008 16.00 Pagina 25 Preparing the wash cycle 25 Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint:: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
132962020.qxd 26 22/05/2008 16.00 Pagina 26 Preparing the wash cycle powder detergents for delicate fabrics (60°C max) and woollens, ● liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme.
132962020.qxd 22/05/2008 16.00 Pagina 27 Care and cleaning 27 Care and cleaning You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
132962020.qxd 28 22/05/2008 16.00 Pagina 28 Care and cleaning 2. 3. 4. 5. Remove the conditioner insert from the middle compartment. Clean all parts with water. Put the conditioner insert in as far as it will go, so that it is firmly in place. Clean all parts of the washing machine, especially the nozzles in the top of the washing-in chamber, with a brush. 6. Insert the detergent dispenser drawer in the guide rails and push it in.
132962020.qxd 22/05/2008 16.00 Pagina 29 Care and cleaning 29 Drain pump The pump should be inspected regularly and particularly if • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled down. 3. Open the pump door. 4. Place a container close to the pump to collect any spillage. 5.
132962020.qxd 30 22/05/2008 16.00 Pagina 30 Care and cleaning 8. Put the cap back on the emergency emptying hose and place the latter back in its seat. 9. Screw the pump fully in. 10. Close the pump door. Warning! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty.
132962020.qxd 22/05/2008 16.00 Pagina 31 Care and cleaning 31 7. replace the emergency emptying hose in its seat after having plugged it; 8. screw the pump again and close the door. Frost precautions If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows: 1. Close the water tap and unscrew the water inlet hose from the tap. 2. Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.
132962020.qxd 32 22/05/2008 16.00 Pagina 32 What to do if... What to do if... Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
132962020.qxd 22/05/2008 16.00 Pagina 33 What to do if... Problem The machine fills then empties immediately: The machine does not empty and/or does not spin: 33 Possible cause/Solution The end of the drain hose is too low. • Refer to relevant paragraph in «water drainage» section. The drain hose is squashed or kinked. E20 • Check the drain hose connection. The drain filter is clogged. E20 • Clean the drain filter.
132962020.qxd 34 22/05/2008 16.00 Pagina 34 What to do if... Problem Cause possible/Solution The door will not open: The programme is still running. • Wait the end of washing cycle. The door lock has not been released. • Wait until the pilot light DOOR has gone off. There is water in the drum. • Select drain or spin programme to empty out the water. The machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance.
132962020.qxd 22/05/2008 16.00 Pagina 35 What to do if... 35 Mo Pro d. ..... d. No ..... . ..... If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. ..... . Se r. No .... . ..... Mod. .......... Prod. No. ........... P0042 BD Ser. No. .........
132962020.qxd 36 22/05/2008 16.00 Pagina 36 Consumption value Water consumption (lltres) Energy consumption (KWh) Programme duration (Hours/Minutes) White Cottons 95° 61 2.0 Cottons 60° 58 1.3 (*)Cotton ECO 60° 46 1.02 Cottons 40° 58 0.7 Synthetics 60° 54 1.0 Delicates 40° 60 0.55 Wool/ Handwash 40° 53 0.4 For the duration of the programmes, please refer to the display on the control panel.
132962020.qxd 22/05/2008 16.00 Pagina 37 Installation 37 Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom. HEC0008 2.
132962020.qxd 38 22/05/2008 16.00 Pagina 38 Installation 4. Unscrew and remove the two large rear bolts B and the six smaller bolts C. C HEC0003 C 5. Remove the bracket D and tighten up the six smaller bolts C. Slide out the relevant plastic spacer E. B D B E C HEC0023 C 6. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal. HEC0010 7.
132962020.qxd 22/05/2008 16.00 Pagina 39 Installation 39 Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.
132962020.qxd 40 22/05/2008 16.00 Pagina 40 Installation 3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. Installation should comply with local water authority and building regulations requirements. Check the minimum water pressure required for safe operation of the appliance in the chapter “Technical Data”.
132962020.qxd 22/05/2008 16.00 Pagina 41 Installation 41 P1118 Important! The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the electrical connection is given on the rating plate on the inner edge of the appliance door and in the chapter «Technical Data».
132962020.qxd 42 22/05/2008 16.00 Pagina 42 Environmental concerns Environmental concerns Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Old machine Use authorised disposal sites for your old appliance.
132962020.qxd 22/05/2008 16.
132962020.qxd 22/05/2008 16.00 Pagina 44 www.electrolux.com www.fors.
