User manual

18
Use
Cancelling the delayed start
● set the washing machine to PAUSE by pressing the button 8;
● press button 9 once until the symbol 0’ is displayed;
● press the button 8 again to start the programme.
Important!
● The selected delay can be changed only after selecting the washing programme
again.
● The door will be locked throughout the delay time. If you need to open the
door, you must first set the washing machine to PAUSE by pressing the button
8 and then wait a few minutes before opening the door. After you have
closed the door, press again the button
8.
● The button 9 can not be selected with DRAIN programme.
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press simultaneously the buttons
2 and 3 some seconds: the pilot light 10.3
comes on. This function stays permanently on. To remove it press the same but-
tons again until the pilot light
10.3 goes off.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
8. Changing a running programme is possible only by resetting it. Turn
the programme selector dial to
O
and then to the new programme position.
Start the new programme by pressing the button
8 again. The washing water in
the tub will be not emptied out.
Interrupting a programme
Press the button 8 to interrupt a programme which is running, the
corresponding light starts blinking. Press the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
O
to cancel a programme which is running. Now you
can select a new programme.
132962020.qxd 22/05/2008 16.00 Pagina 18