User manual

Time save button
6
Press the button
6
to decrease the pro-
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only one of
the two functions.
Extra rinse button
7
Press button
7
to add rinsing phases to a
programme.
Use this function for persons allergic to de-
tergents and in areas where the water is
soft.
Stain button
8
Press button
8
to add the stain phase to a
programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain re-
mover into compartment
.
This function increases the programme
duration.
This function is not available with a
temperature lower than 40° C.
Spin button
9
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
Spin phase is off.
'Rinse Hold' function is on.
Temperature button
10
Press button
10
to change the default tem-
perature.
- -
= cold water
Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
8
and button
7
at the
same time for 6 seconds.
If you deactivate the acoustic signals,
they continue operate only when you
press the buttons and when a malfunc-
tion occurs.
Child lock function
This function prevents children to play with
the control panel.
•
To activate the function, press button
10
and button
9
at the same time until the
display shows the symbol
.
• To deactivate the function, press button
10
and button
9
at the same time until
the symbol
goes off.
You can activate the function:
• Before you press the Start/Pause button
4
: the appliance cannot start.
• After you press the Start/Pause button
4
, all the buttons and the programme
knob are deactivated.
Permanent extra rinse function
With this function you can keep the extra
rinse function permanently on when you set
a new programme.
•
To activate the function press button
6
and button
5
at the same time until the
indicator of button
7
is on.
• To deactivate the function press button
6
and button
5
at the same time until
the indicator of button
7
is off.
7