User manual

19
Starting a programme
1. Check that the water tap is open.
2. Press the START key. The wash cycle is started.
Programme progress
While the programme is running, the display shows
among other things:
– each stage of the programme as it progresses, e.g.
MAIN WASH,
– a bar showing the progress of the programme,
– the loading of the drum (with the LINEN/EASY-
CARES and COTTONS programme only),
– the expected residual moisture in the washing at
the end of the programme.
Interrupting a programme/
Adding washing
Interrupting a programme
• The wash programme can be temporarily interrupt-
ed at any time by pressing the PAUSE key. It is
then re-started by pressing the key again.
• To cancel a programme before it has finished,
switch off the appliance (press the control knob).
Adding washing
• Depending upon the temperature and water level,
after the start of the programme it is still possible
to add washing for a certain time.
1. Press the PAUSE key. The O symbol appears in
the display.
2. Open the door.
3. Add washing, close the door again.
4. Press the START key.
DELICATES 30°C
1200 RPM 11:25-12:36
î
START
LINEN/EASY-C.
30°
ENERGY SAVING
COTTONS
1200
DELICATES(
OPTIONS WOOLLENS H
LINEN/EASY-C. 40°C
1400 RPM 11:25-13:34
N
PAUSE
MAIN WASH
###############========]
LOADING 80%
1400
MOISTURE 50%