User Guide

QUICK START GUIDE
Automatic calf feeder
2.3 CalfApp GO! & CalfCloud
Internet connection
1
Connect the automatic calf feeder to the Internet via an Ethernet cable
1.1
1.2
Insert external Ethernet cable through the intended opening
on the side of the feeder
Connect inserted Ethernet cable to the preinstalled adapter in
the grey tube
1.1
1.2
Settings
2
Communication
Setup
Network Conguration
IP assignment
DHCP
data will be assigned auto-
matically (standard)
Static
manual set up of IP
address
Accept
Device Data
Cloud
Activate the connection to the cloud, by conrming with Enter key.
Terminate?
This menu shows the current connection status. You can also
stop the connection / data transfer using „terminate“.
or
or
error
Auth-Token [1X2Y3Z]
Start?
Status [online]
[ Online ] or [Ofine] or [Reconnecting / Connecting]
Needed to add feeder to cloud
CalfCloud
3
www.calf-cloud.com
Register or Login
Add Feeder
Registration token
Device Data
Cloud
Auth Token
CalfApp GO!
4
Download from Play Store or App Store
Choose same local network like feeder
Keep pressed
turn the automatic feeder on again, keep button
pressed until the Setup menu is displayed
Turn of the feeder
This document provides a brief overview of how to get the calf feeder smart connected to the internet.
and leave the Setup
menue
Get Token from the calf feeder
Device Data
App
Create Token
Connect the Calf feeder with the App
Connect in the App
[ Devices ] [connect feeder]
This checklist refers to the basic equipment of the calf feeder. Not all available functions of the automatic feeder or the extensions can be shown.
For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)