Installation Guide

This checklist refers to the basic equipment of the calf feeder. Not all available functions of the automatic feeder or the extensions can be shown.
For detailed information and valid warnings as well as safety instructions, please refer to the instructions manual. (Status 21/07)
Connect water
1
Connect power
2
3
Establish ground connection
4
Connect milk tank
5
Provide draining options
Place milk tank next to the feeder on
same or on higher level
Left sideRight side
1
5
3
4
2
1 on the left side of the feeder, 1 in front of
the feeder in the middle of the housing and
1 at every feeding station
50-80 cm
10-15 cm
6
12
Open door on the left side and plug it in
This document provides a brief overview of the things that need to be taken into account when commissioning a feeder for the rst time.
8
9
7
19,7 - 31,5 ´´
50-80cm
TIP: For more details, see the corresponding
assembly instructions.
Mount and connect raceway, antenna
and suction point
or
4 - 6´´
Mount protective grid
Connect Ethernet cable
Switch on vapour screen for powder
outlet
if available
8
7
11
Install external detergent supply
12
MP
OFF
ON
Fill with milk powder
9
Turn the automatic feeder on
13
TIP: The switch can be found on the main board
of the calf feeder (Open the plate on the back)
11
10
Fill milk tank with milk
QUICK START GUIDE
Automatic calf feeder - combi
1.1 Installation checklist
TIP: check QuickStartGuide 2.3.CalfCloud