Instruction Manual

6. Take out the lower left hinge from the accessory bag,

and install it on the refrigerator.

7. Remove the door stopper and door closer, take out the

door closer from the accessory bag, and install it on the

left side of the door.

8. Install the door on the refrigerator.

9. Take out the bolts of the upper left hinge from the

accessory bag, fix them on the cabinet, and connect the

wiring harness.

10. Take out the top left hinge cover, connect it with the

wiring harness, and install them on the cabinet.

11. Install the magnet on the left side of the door.

12. Remove the help handle cover, screw off the handle

screws, and dismantle the handle, as illustrated by the

figure:

13. Install the help handle on the other side of the door

after rotating it by 180° vertically, as shown in the figure:

14. In this way, reversing the door swing can be finished,

as shown in the figure: