Installation Manual

38
Preparing the Water Hose and the Power Plug
You will need a hose with a minimum length of 60" (1.5 meters) and a diameter of ¼" for water connections
of the product during installation.
A connector that has a thread with an external diameter of ¼ must be used to connect the hose end to the product.
You can choose the method A or method B below to prevent the cable from getting jammed.
• Method A ：Locate the water hose and power supply on the back
• Method B ：Locate the water hose and power supply on the side
Water hose
2” (50.8mm)
8” (203.2mm)
Keep for Power cord
Keep open for water line
water line location
Cable location