Installation Manual

Confidential
5
• Minimum clearances between product parts and surrounding structures must be suitable.
• Minimum dimensions and proper organization of ventilation holes must be observed.
• The product must be connected to the mains power,
and corresponding connections of other components must be suitable.
• The product must be disconnectable from the power supply after installation.
• The socket or fuse must be accessible to de-energize the product.
• Extension cables or ungrounded (two-terminal) adapters must not be used.
ATTENTION:
You must wear gloves and eye protectors when installing the product.
You must also take measures against high noise levels when drilling the floor or using a drill.
ATTENTION:
Make sure that your product is suitable for your local mains.
ATTENTION:
The product must be installed by a qualified technician according to the installation instructions.
WARNING:
The product may tip over since it is quite heavy. For this reason, precautions must be taken against tipping over.
The doors of the product must be kept closed until it reaches the destination and it must be transported
in accordance with the installation instructions.