INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS FOR COOKER HOODS MODEL: VERTICE 120V - 60HZ Cod.
ENGLISH INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS FOR COOKER HOODS: MOD. VERTICE 120V – 60HZ WARNINGS READ AND SAVE THESE INSTRUCTIONS CAUTION: Automatically Operated Device – To Reduce The Risk Of Injury Disconnect From Power Supply Before Servicing. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.
• Do not sprinkle or throw any water directly on the appliance. • Do not stick any sharp tool inside the exhausting holes and into the air discharge. • Do not take out the filters in order to reach the internal sides of the appliance in case the main switch of the house electrical system is not off. • Do not singe or flambé directly underneath the cooker hood. Take particular care when frying to ensure that the oil does not catch fire.
To replace the activated carbon filters, open the mail panel and remove the central protection (Fig. 11 and Fig. 12). At this point the activated carbon filters can be moved by rotating them about 90° with respect to their position to release then from the interlocking tabs, then accompanying the filter downwards without the aid of tools (Fig.13 and Fig.14). To reinstall the new activated carbon filters, reverse operations.
