GENERAL INFORMATION Main Features For your Safety Unpacking General Operation RCU 3 3 4 5 5 6 INSTALLATION Front Panel Rear Panel Connecting to TV& VCR using SCART support Connecting to TV using RCA support Connecting to Digital Amplifier MENU INFORMATION Main Menu 1. Channel List 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete Al 1.4 Delete channels by satellite 2. Installation 2.1 Antenna Connection 2.2 Satellite List 2.3 Antenna Setup 2.4 Single Satellite Search 2.5 Multi Satellite Search 2.
4. Tools 4.1 Information 4.2 Factory Setting 4.3 Upgrade by USB 4.4 USB 5. Game 6. REC 6.1 Record Mangager 6.2 HDD Information 6.3 HDD Format 6.4 PVR Setting 7. Hot key 7.1 Info 7.2 EPG 7.3 Find 7.4 Numer 7.5 TV/Radio 7.6 Up/Down 7.7 Left/Right 7.8 Mute 7.9 Pause 7.10 OK 7.11 Audio 7.12 Recall 7.13 Fav 7.14 Teletext 7.
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full of these feature. Information confirmed in this document is subject to change.
For Your Safety To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified personnel only. Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment. Do not expose the receiver un-der the sunlight. And keep it away from the heat source. Do not block ventilation holes of the Receiver so that air can circulate freely. When the abnormal phenomenon occur, you should cut off the power immediately.
DE F 3 AB C M NO 2 .,*?!@ 6 JK 1 L W XY 5 G HI Z 9 TU 4 V 8 PQ PR . RS 7 0 ME IO AD /R TV P EP S AU P LA G NU S TO E P Y SH IN IF T FO RD CO RE PR + OK T L IS EX IT PR AV S LE F TV SA /A EP L R V TX T ZO FI OM T S LO W ND FA ST R Remote Control Batteries Guide General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus.
RCU Key Function Turns power ON/OFF of the DSR .,*?!@ ABC DEF 1 2 3 GHI JKL MNO When watching a channel, mute the sound 0~9 4 PQRS 5 6 TUV WXYZ 8 9 7 TV/RADIO PR .
Rear Panel Front Panel Rear Panel LNB IN: CONNECT TO SATELLITE ANTENNA LNB OUT:CONNECT TO THE OTHER RECEIVER CONNECT TO A PC FOR S/W UPGRADE CONNECT TO TV AND VCR USING A SCART CABLE CONNECT TO 12V TO AN EXTERNAL 0/12V SWITCH POWER ON/OFF CONNECT VIDEO TO TV USING RCA JACK CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER CONNECT TO A DIGITAL AMPLIFIER Connecting to TV using SCART support Satellite Dish DSR IN TV SCART
Connecting to TV using RCA support Satellite Dish IN VIDEO AUDIO TV R L Connecting to Digital Amplifier Satellite Dish IN TV DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER L R DIGITAL AUDIO
Main Menu Make sure that you have properly installed and connected the cables of the receiver well. If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen. During the normal TV/Radio mode, press MENU key on the RCU to enter into the Main Menu window. This menu consists of 6 major main menus as follow.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey.
3. Press FAV key to move the FAV button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program. Press FAV key again to exit from the fav mode, and you will find the FAV button return to the origin position. 4. Press red colour key to move the Lock button upward.
7. Press blue colour key to enter into the Edit channel window. i . Sort (red colour key) Press red colour key to pop up the Sort dropdown list. Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z). Free/Scrabmle:: All FTA programs are listed ahead, while all scrambled programs are listed last. Lock: all locked programs are listed at the last. ii.
If the name is empty, system will pop up a dialogue informing "Name" once yellow colour key is pressed. Press OK key to close this dialogue. iii. Delete (blue colour key) In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?".
2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 2.1 Antenna Connection Press keys to select between Motor Antenna and Fixed Antenna. 2.2 Satellite List 1. Press PR+, PR- keys to select the satellite up or down.
4. Press green colour key to pop up the Add Satellite window. Since the same operation as the above Edit Satellite window, here we don't explain any more. 5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite. You can cancel this operation by pressing OK key at the NO button. 2.3 Antenna Setup Part A: Fixed Suppose that you have selected Fixed Antenna in the Antenna Connection window. 1.
3. Delete All: Press OK key to pop up the dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that has connected to the current turner. 4. Motor Setting: Press OK key to the Motor Setting window. Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the dropdown list, then select the desired satellite in the list and press OK key to confirm.
6. If select USALS, Delete All item will turn grey. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90.
2.5 Multi Satellite Search From the Multi Satellite Search window, you can search several satellites at the one time. 1. Satellite: All selected satellites in the satellite list window are displayed on the down part. You can press keys to switch among them. 2. FTA Only: Press keys to select between Yes and No. 3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio. 4. Network Search: Select between No and Yes.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at the Yes button to delete the selected TP, or press EXIT key to cancel the operation. 5. Press blue colour key to pop up the TP Search window. FTA only, Scan Channel, Network Search: Press keys to select the proper option. Press OK key at the OK button to start searching. 3. System Setup 1. Press OK key or key to move the cursor to the right menu. 2. Press PR+, PR- keys to move the cursor up or down. 3.
3.2 TV Press PR+, PR- key to move the cursor up or down, while press keys to change the setting and the setting will take effect immediately. 1. Display Mode: Select among Auto,PAL, PAL-M, PAL-N, NTSC. 2. Aspect Mode: Select among 4:3LetterBox, 4:3PanScan, 16:9. 3. Video Output: Select between RGB and CVBS. 3.3 Local Time Setting 1. Summer Time: Select between ON and OFF. "OFF" delegates the normal time. If select ON, time will add one hour. 2.
2. Timer Service: Select between Channel and Message. If Channel is selected, the Wakeup Channel is displayed in the following item. If Message is selected, the Wakeup Message is displayed in the following item. In wakeup message, you can select among Birthday, Anniversary, General. At the same time the duration item turns grey. 3. Wakeup Date, On Time: Use numeric keys to input the valid date. Duration: Set the gap time. After waking up, system will power off automatically after the duration time.
3.6 OSD Setting 1. Subtitle Display: Press keys to select between On and Off. 2. OSD Timeout: Press keys toselect from 1 to 10 by step1. The default values Is 5. 3. OSD Transparency: Press keys to select among Off, 10%, 20%, 30%, 40%. The default option is Off. Press MENU or EXIT key to save and exit. 3.7 Favorite There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window.
4.1 Information Press OK key to the Information window. 4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit. 4.3 Upgrade by USB 1.Upgrade File: Show the Upgrade File. 2.Upgrade Mode: Select between AllCode and Dump.
4.4 USB USB menu will be automatically shown when insert U disk to USB port except auto scan, multi picture, upgrade. Or open USB menu according to Menu -> Tools-> USB. Press OK to enter into this window. USB menu will be disabled when no USB device is plugged. Media Play List will not be saved when USB plug out or standby or power off. Move scroll bar when press up/down key, page up or down by page key.
3.Blue Key: Press Blue Key, will delete all image files in play list, but system will remind you Are you sure? before practical operation, if you select Yes, all file will be deleted and Play list window will be closed. 4.Green key: Press Green Key will show Setup Menu, please see the besides setup menu. 5. Game 1. Press OK key or key to enter into the game. 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 4.
6.3 HDD format Press OK at the HDD Format button to pop up the dialogue Are you sure to format the disc? You can select FTA,NTFS or Cancel. 6.4 PVR Setting 1.Timeshift:If you set timeshift On , it will record the current channel you watch automatically. Then you can press [Pause] / [Fast Backward] / [Slow Backward] key to watch the previous program. If timeshift is Off , timeshift function doesn t work. Select between ON and OFF. 2.Jump:Select among 30sec,1min,5min,10min and 30min. 7. Hot Key 7.
: Press OK key at this button to move the cursor to the current time line. : Press OK key to push the time forward or backward by half an hour. : Press OK key to push the time forward or backward by half an hour. : Press OK key to push the time forward or backward by a day. From the current day, you can switch among the future 14 days in circle. 3.
7.8 Mute Press key to close the volume. You can press volume, or press key once again to restore the keys to open the volume. 7.9 Pause During the viewing, you can press PAUSE key to stop the picture while the volume continues. You can play the picture by pressing PAUSE key once again. 7.10 OK 1. During the viewing or listening, press OK key to pop up the TV program list or the Radio program list. 2.
7.13 FAV 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group. Press PR+, PR- keys to select the channel up or down.. Press OK key at the selected channel to view it in full-screen. Press MENU or EXIT key to exit. 3. If there is no favorite channel, system will inform " No FAV Channel!" when you press FAV key. 7.14 Teletext Press TXT key to open the teletext on the screen. If there is no teletext, system will inform "No Teletext Data". Press EXIT key to exit. 7.
Problem Possible causes What to do The display on the front panel does not light up. Main cable is not connected. Check that the main cable is plugged into the power socket. No sound or picture, but the front panel shows red light. The receiver is in standby mode. Press the standby button. The satellite dish is not pointing at the satellite. Adjust the dish. Check the signal level in the Antenna Setup menu. No signal or weak signal.