User's Manual

To enable Cold Start Timer Mode proceed with the following steps.
+
ress and release the FUNCTION button, within 12 seconds
simultaneously press and and hold the LOCK and START
buttons for 1 second.
To disable Cold Start Timer Mode do any of the following:
• Press and release the FUNCTION but-
ton, within 12 seconds to simultane-
ously press the LOCK and the START
buttons for 1 second until the parking
light  ash twice.
• Put the Remote-Starter/
alarm into Valet Mode.
Remote-Start the vehicle.
• Open the hood.
• Press the brake pedal.
• Turn the key to the ignition
(ON / RUN) position.
• Disable Ready Mode
(manual transmission).
Note: If the Alarm is triggered during Remote-Start (Cold Start), the vehicle will stop running, but Cold
Start will not cancel it’s schedule.
AUXILIARY USE
Aux 1: Drivers side sliding door (if installed):
Press and relase the FUNCTION (the remote LED  ashes slowly white) button
within 12 seconds press the button LOCK button
Aux 2: Passenger side sliding door (if installed).
Press and relase the FUNCTION button (the remote LED  ashes slowly white)
within 12 seconds press the UNLOCK button.
Note: The function of the auxiliary outputs may vary depending on the vehicle and the installation. In
most cases these outputs are not used, and in some cases they may be used to control other features
such as the power windows, sunroof, or heated seats. Check with the installer to  nd out what AUX
outputs have been installed, and what they control.
DISABLE AND ENABLE REMOTE CONTROL FUNCTIONS
LOCK THE REMOTE UNLOCK THE REMOTE
+
To disable all the buttons on the remote:
simultaneously press and hold the
LOCK and buttons until the RED
LED comes on.
The RED LED will come on Whe-
never a button is pressed when the
remote is LOCKED.
+
To enable the buttons
on the remote: simul-
taneously press and
hold the
LOCK and
FUNCTION buttons
until the GREEN LED
comes on
REMOTE STARTING OPTIONS
CONFIGURABLE FONCTIONALITY DURING INSTALLATION
This Remote-Starter is designed to be highly  exible when integrating into original equipment (OEM).
With the following programmable options the Remote-Starter/Alarm can control most electronic sys-
tems within the vehicle.
Page 11 / 15