User's Manual

7
Mounting
1
M3x16L Screw
Anchor
1. Select an appropriate location and mark the location on the wall where the anchors
will be located.
2. Insert the anchors provided in the wall mount kit into the wall in the marked locations.
If necessary, drill holes into the wall with an appropriately sized drill bit prior to inserting
the anchors.
3. Screw the provided M3x16L screws into the two anchors, leaving enough of the
screws exposed to ensure that the unit can be mounted on them.
4. Mount the FortiAP unit onto the screws and ensure that it is mounted securily.
You can now proceed with connecting your FortiAP unit.