User's Manual

66 7
To mount the device on a wall or ceiling
1. Select an appropriate location, then mark the location on the wall or ceiling where the
anchors will be located.
2. Drill the mounting holes in the marked locations with an appropriately sized drill bit,
then insert the provided anchors into the holes.
3. Screw the provided screws into the anchors, leaving enough of the screw exposed
to ensure that the unit can be mounted on them.
4. Mount the device onto the screws and ensure that it is mounted securely.
Installation
1
The unit can be mounted on a wall or ceiling using the provided wall-mount hardware. It
can also be mounted on any appropriate magnetic surface, such as the side of a desk,
using the built-in magnets on the bottom of the device.
The device can be mounted horizontally or vertically as needed.
To mount the device using the magnets
1. Select an appropriate location, such as a shelf or office partition, onto which the
device can be stuck.
2. Stick the device to the magnetic material and ensure that it is mounted securely.
Magnets
Mounting Slots