User's Manual

Page 3
proceed as follows:
- Use caution; do not become a victim yourself
- Disconnect power from the system
- If possible, send another person to get medical aid. Otherwise, access the condition of the victim and then
call for help.
- Determine if the person needs rescue breating or external cardiac comparessions; then take appropriate
action.
3.3 Installing
- Remove the module from its protective packaging
- Avoiding Electrostatic Discharge
- Before your install the module, ground yourself by touching a piece of metal to avoid electrostatic
discharge (EDS).
You share able take the following precautions to prevent damage to the module:
- Keep module in its antistatic-shielded bag until you are ready to install it.
- Handle the module by its edges.
- Ensure the connector is connected to above Model’s board tightly.