FortiAP 221E, 223E QuickStart Guide
7/10/2017 Copyright© 2017 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners.
Environmental specifications Ambient operating temperature: 0C to 40C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude). Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l'altitude). Safety Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101.
Box Includes or FortiAP device QuickStart Guide X Z X Z ( ODE L antenna (Externa Wall Mounting Hardware 4 Antennae 2.
Before You Begin Write down details typically provided by your network administrator or ISP. Static IP address IP address ___________________ Subnet Mask ___________________ Default Gateway ___________________ Primary/Secondary DNS ___________________ DHCP It is normal to not require a hostname, but your ISP might require it. Hostname ___________________ QuickStart Guide Video https://video.fortinet.
Internal221E antenna models FortiAP - Device FrontDevice Front : FortiAP 221E LED1: WLAN 2 (5GHz) LED5: Power Off: Wireless Link administratively disabled/off Green: 5GHz Wireless Radio enabled Blinking: Transmitting and receiving data Off: No Power Green: Power on and ready for operation Blinking: Device booting LED4: Status LED2: WLAN 1 (2.4GHz) Off: Wireless Link administratively disabled/off Green: 2.
FortiAP - Device FrontDevice Front: External223E antenna models FortiAP 223E LED1: WLAN 2 (5GHz) Off: Wireless Link administratively disabled/off Green: 5GHz Wireless Radio enabled Blinking: Transmitting and receiving data LED5: Power Off: No Power Green: Power on and ready for operation Blinking: Device booting LED4: Status LED2: WLAN 1 (2.4GHz) Off: Wireless Link administratively disabled/off Green: 2.
Internal antenna models FortiAP 221E - Device RearDevice Rear: LAN/PoE Power connection for optional power adapter. 12V DC, center positive. External antenna models FortiAP 223E - Device Rear Device Rear: 5.0 GHz Antenna 2.4 GHz Antenna LAN/PoE Power connection for optional power adapter. 12V DC, center positive. 5.0 GHz Antenna 8 2.
Installation unlock lock 9
or The unit can be mounted on a wall or ceiling using the mounting hardware provided. The electrical wall box must be pre-installed.
Basic Connection Network Core/FortiGate WAN/POE Connect the FortiAP device to a FortiGate controller or an Internet connection. Ensure that the Power over Ethernet (PoE) cable is connected to an applicable port on your FortiGate device or PoE injector. Caution: Adequate grounding must be provided to the FortiAP unit and the PoE injector, in compliance with your local electrical code or regulations. Warning: This device complies with IEEE 802.3af PoE specification.
FortiAP Setup Deployment through a FortiGate Ensure that you are running the Fortinet recommended version of software. Please check support.fortinet.com for more information. If FortiGate is on the same network as the FortiAP: 1. Use FortiGate to preauthorize the FortiAP device. 2. Refer to the “Access Point Deployment” section of the FortiWiFi and FortiAP Configuration Guide found at http://forti.net/ap-docs. 3. Plug the FortiAP into your local Ethernet connection. The FortiAP will selfconfigure. Or 1.
If FortiGate is not on the same network as the FortiAP: 1. Log into FortiAP directly (IP address: 192.168.1.2) with username admin and no password, and specify the IP address of the controlling FortiGate. 2. Connect to FortiAP via the CLI using the instructions in the “Connecting to FortiAP CLI” section of the FortiWiFi and FortiAP Configuration guide. 3. Specify the IP address of the controlling FortiGate: cfg -a AC_IPADDR_1=0.0.0.0 cfg -c where 0.0.0.0 is the address of the FortiGate. 4.
Cautions and Warnings Environmental specifications Ambient operating temperature: 0C to 40C Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude) Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température de fonctionnement, température de stockage, humidité et l'altitude). Safety Battery – Risk of explosion if the battery is replaced by an incorrect type.
Le produit doit être alimenté par un bloc d'alimentation à courant continu homologué UL de 12 Vdc, 2A nominal marqué LPS ou Class 2 ou par une source d’alimentation par Ethernet de 48 Vdc (PoE). Regulatory Notices Federal Communication Commission (FCC) – USA This device complies with Part 15 of FCC Rules.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: Operation of this device is restricted to indoor use only. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.
Caution: The device for the band 5150-5250 MHz is only for indoor usage to reduce potential This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. for harmful interference to co-channel mobile satellite systems. This equipment should be installed and operated with minimum distance 23cm between the radiator & The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that your body. the equipment still complies with the e.i.r.p.
to other users, theàantenna type and itsd'ISED, gain should be so chosen thefonctionner equivalent isotopically Conformément la réglementation cet émetteur radiothat peut seulement avec radiated powerd’un (e.i.r.p.) more than that necessary for successful communication. une antenne typeisetnot d'un gain maximal (ou inférieur) approuvé pour l'émetteur par ISED.
Brand Holder Gain (dBi) Quantity Antenna Type Connector 2.4GHz 5GHz Internal antenna model Senao Networks, Inc 1 Printed IPEX 4.5 4.4 - Senao Networks, Inc 1 Printed IPEX 4.5 - Senao Networks, Inc 1 Printed IPEX - 5.6 Senao Networks, Inc 1 Printed IPEX - 5.6 Brand Holder Gain (dBi) Quantity Antenna Type Connector 2.4GHz 5GHz External antenna model Senao Networks, Inc 2 Dipole RP SMA Plug 4.58 - Senao Networks, Inc 2 Dipole RP SMA Plug - 5.
European Conformity (CE) - EU This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. The product transmits within the frequency ranges and less than or equal to the power listed below: 2412-2472MHz less than 20dBm 5180-5240MHz less than 23dBm 5260-5320MHz less than 23dBm * 5500-5700MHz less than 30dBm * Note: * Only with DFS bands certification.
Fortinet Customer Service & Support Create a support account, register and manage your products, download updates, firmware images and release notes, and create technical support tickets. https://support.fortinet.com Fortinet Document Library Up-to-date versions of Fortinet publications for the entire family of Fortinet products. http://docs.fortinet.com Training Services Course descriptions, availability, schedules, and location of training programs in your area. http://www.fortinet.
