User's Manual

Installation

IMPORTANT NOTE: The device must be professionally installed and must use the

supplied antennae.

The unit is designed for outdoor use and may be attached to either a pole or wall. A

waterproof connector is supplied to ensure a watertight seal for connecting the Ethernet

cable to the device.

Note: The included PoE injector and surge protector must be mounted indoors, as they

are not weatherproof.

To mount the device on a wall

1. Using the wall-mount base as a template, mark the location of the mounting bolt

holes on a ﬂat wall surface.

2. Drill the mounting holes in the marked locations.

3. Fasten the wall-mount base securely to the back of the unit using the provided

mounting screws.

4. Attach the unit and base assembly to the wall using the provided concrete mounting

bolts.

5. Securely tighten the mounting bolts.

FortiAP-222C-QuickStart.indd 6 2014-08-05 3:33:15 PM